mpls
-
Mar 30, 2015
The goal of the protection is minimizing the down time. To do this, protection must be done near to the...
-
Mar 30, 2015
As we say in the following articles, while using Secondary LSP-Paths, sharing links between Primary and Secondary LSP-Paths must be...
-
Mar 30, 2015
There are some different types traffic protections. In general we can divide these types into two groups. End-to-end Protection and...
-
Mar 30, 2015
As you know, we can prioritize some of the traffic with MPLS-TE because of their nature. The high priority can...
-
Mar 30, 2015
After the link failure in MPLS network, there are some actions need to be done orderly for MPLS recovery. This...
-
Mar 30, 2015
What Happens After the Failure Recovered By Fast Reroute (FRR) ? After detecting the failure in an MPLS network, in...
-
Mar 30, 2015
In the Alcatel-Lucent 7750 Service Routers, we can verify the Secondary LSP-Path configuration with the following commands. Verifying secondary LSPs...
-
Mar 29, 2015
There some RSVP Objects used in Fast Reroute(FRR). Beside this, RSVP-TE extend for this purposes. There are also some extensions...
-
Mar 12, 2015
[edit] user@R1# edit protocols mpls label-switched-path lsp-path-name [edit] user@R1# edit protocols mpls label-switched-path lsp2-A-to-B To configure node-link protection for the...
-
Mar 12, 2015
[edit] user@R1# edit protocols rsvp interface type-fpc/pic/port [edit] user@R1# edit protocols rsvp interface fe-1/1/1 To configure link protection for the...
Popular posts
Cisco Interview Questions
June 30, 2025
CCNA
Network Operating System
March 13, 2025
Basic
CCNA Minor Update! | CCNA 200-301 v1.1
July 9, 2024
Basic
Cisco Packet Tracer Overview
June 26, 2024
CCNA
