MPLS

MPLS Protection and Restoration – Part 8 (Actions After the Failure)

Mar 30, 2015
Alcatel-Lucent

What Happens After the Failure Recovered By Fast Reroute (FRR) ? After detecting the failure in an MPLS network, in...

MPLS Protection and Restoration – Part 7 (Verification Commands on Alcatel-Lucent Routers)

Mar 30, 2015
Alcatel-Lucent

In the Alcatel-Lucent 7750 Service Routers, we can verify the Secondary LSP-Path configuration with the following commands. Verifying secondary LSPs...

MPLS Protection and Restoration – Part 6 (RSVP Objects Used for MPLS Fast Reroute)

Mar 29, 2015
Alcatel-Lucent

There some RSVP Objects used in Fast Reroute(FRR). Beside this, RSVP-TE extend for this purposes. There are also some extensions...

MPLS Protection and Restoration – Part 13 (Juniper Configuration Samples)

Mar 12, 2015
Cisco

[edit] user@R1# edit protocols mpls label-switched-path lsp-path-name [edit] user@R1# edit protocols mpls label-switched-path lsp2-A-to-B To configure node-link protection for the...

MPLS Protection and Restoration – Part 12 (Juniper Configuration Samples)

Mar 12, 2015
Cisco

[edit] user@R1# edit protocols rsvp interface type-fpc/pic/port [edit] user@R1# edit protocols rsvp interface fe-1/1/1 To configure link protection for the...

MPLS Protection and Restoration – Part 11 (Juniper Configuration Samples)

Mar 12, 2015
Basic

One-to-one (fast reroute) backup Configuratio To enter edit mode… [edit] user@R1# edit protocols mpls To configure the LSP… [edit protocols...

MPLS Protection and Restoration – Part 10 (Juniper Configuration Samples)

Mar 12, 2015
Basic

One-to-one (Fast Reroute) configuration on JuNOS [edit] protocols { mpls { label-switched-path lsp-path-name { fast-reroute; } } } Many-to-one (Facility...