PPP Configuration on Huawei

In this lesson, we will talk about PPP configuration on Huawei Routers. For our PPP Configuration example, we will use the below basic topology:   Orderly, we will do the below configuration for our PPP Configuration Example:   1) Enabling PPP 2) PAP and CHAP Authentication 3) Verifying PPP and PPP Authentication   Let’s start to configure PPP for this topology.

Enabling PPP

  In this basic PPP configuration example, firstly we will configure the serial interfaces to use PPP. After that, we will assign the ip address of this interface with its subnet mask. We will do this configuration on Router 1 firstly.   system-view [Huawei-Router-1] interface Serial 0/0/0 [Huawei-Router-1-Serial0/0/0] link-protocol ppp Warning : The encapsulation protocol of the link will be changed Continue? [Y/N] : y [Huawei-Router-1-Serial0/0/0] ip address 192.168.1.1 30 [Huawei-Router-1-Serial0/0/0] quit Now, let’s configure Router 2 like above.   system-view [Huawei-Router-2] interface Serial 0/0/0 [Huawei-Router-2-Serial0/0/0] link-protocol ppp Warning : The encapsulation protocol of the link will be changed Continue? [Y/N] : y [Huawei-Router-2-Serial0/0/0] ip address 192.168.1.2 30 [Huawei-Router-2-Serial0/0/0] quit

PAP and CHAP Authentication

We can configure each of these Authentication Protocols on Huawei Routers. Let’s start with PAP. system-view [Huawei-Router-1] aaa [Huawei-Router-1-aaa] local-user abc password cipher abc123 [Huawei-Router-1-aaa] local-user abc service-type ppp [Huawei-Router-1] interface Serial 0/0/0 [Huawei-Router-1-Serial0/0/0] link-protocol ppp [Huawei-Router-1-Serial0/0/0] ppp authentication-mode pap [Huawei-Router-1-Serial0/0/0] quit [sc name=”ContentRMessage”]