STP Portfast Configuration with Packet Tracer

Packet Tracer STP Portfast Configuration

In STP (Spanning Tree Protocol) there are different states. These STP states are: Blocking State, Listenning State, Learning State and Forwarding State. With STP Portfast, Listenning State and Learning State are bypassed. With this configuration, ports rapidly goes to Forwarding State.   The access ports of the switches that connect to hosts can configured with Spanning Tree Portfast. And with Portfast, the host ports rapidly goes to Forwarding State. Here, host means, PCs, Laptops, IP Phone and other user equipments.  

---

For all Packet Tracer Examples and Files, you can check Packet Tracer Labs Page.

---

  For our Spanning Tree Portfast configuration, we will use the below topology on Packet Tracer. Here, we have four Cisco swithces in our Spanning Tree domain.   STP Portfast TopologyBefore this STP configuration, let’s check the STP behaviour without Portfast.   You can delete the link of PC2 and then reconnect it for checking the behaviour of STP without Portfast. After this process, you will see STP states one by one.  

Switch# show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32769 Address 0006.2A11.24CC Cost 38 Port 1(FastEthernet0/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 sys-id-ext 1) Address 000A.4139.1675 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 20 Interface Role Sts Cost Prio.Nbr Type —————- —- — ——— ——– ——————————– Fa0/1 Root FWD 19 128.1 P2p Fa0/2 Altn BLK 19 128.2 P2p Fa0/3 Desg FWD 19 128.3 P2p Fa0/4 Desg LSN 19 128.4 P2p Fa0/5 Desg FWD 19 128.5 P2p

 

Switch# show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32769 Address 0006.2A11.24CC Cost 38 Port 1(FastEthernet0/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 sys-id-ext 1) Address 000A.4139.1675 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 20 Interface Role Sts Cost Prio.Nbr Type —————- —- — ——— ——– ——————————– Fa0/1 Root FWD 19 128.1 P2p Fa0/2 Altn BLK 19 128.2 P2p Fa0/3 Desg FWD 19 128.3 P2p Fa0/4 Desg LRN 19 128.4 P2p Fa0/5 Desg FWD 19 128.5 P2p

 

Switch# show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32769 Address 0006.2A11.24CC Cost 38 Port 1(FastEthernet0/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 sys-id-ext 1) Address 000A.4139.1675 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 20 Interface Role Sts Cost Prio.Nbr Type —————- —- — ——— ——– ——————————– Fa0/1 Root FWD 19 128.1 P2p Fa0/2 Altn BLK 19 128.2 P2p Fa0/3 Desg FWD 19 128.3 P2p Fa0/4 Desg FWD 19 128.4 P2p Fa0/5 Desg FWD 19 128.5 P2p

 

---

For all Packet Tracer Examples and Files, you can check Packet Tracer Labs Page.

---

  Now, let’s configure Portfast on all access interfaces. For this, we will use “spanning-tree portfast default” command. This command enables STP Portfast, on all access interfaces.

Switch (config)# spanning-tree portfast default

  After Portfast configuration on switch, let’s check the states again by deleting and reconnecting the cable of port Fa0/4. When we delete the cable that on fa0/4 on Packet Tracer, the port is also removed on “show spanning-tree”.  

Switch# show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32769 Address 0006.2A11.24CC Cost 38 Port 1(FastEthernet0/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 sys-id-ext 1) Address 000A.4139.1675 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 20 Interface Role Sts Cost Prio.Nbr Type —————- —- — ——— ——– ——————————– Fa0/1 Root FWD 19 128.1 P2p Fa0/2 Altn BLK 19 128.2 P2p Fa0/3 Desg FWD 19 128.3 P2p Fa0/5 Desg FWD 19 128.5 P2p When we connect the cable again, then the port immediatelly become up and go to the Forwarding State. Switch# %LINK-5-CHANGED: Interface FastEthernet0/4, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up

 

Switch# show spanning-tree VLAN0001 Spanning tree enabled protocol ieee Root ID Priority 32769 Address 0006.2A11.24CC Cost 38 Port 1(FastEthernet0/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32769 (priority 32768 sys-id-ext 1) Address 000A.4139.1675 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 20 Interface Role Sts Cost Prio.Nbr Type —————- —- — ——— ——– ——————————– Fa0/1 Root FWD 19 128.1 P2p Fa0/2 Altn BLK 19 128.2 P2p Fa0/3 Desg FWD 19 128.3 P2p Fa0/4 Desg FWD 19 128.4 P2p Fa0/5 Desg FWD 19 128.5 P2p

You can download “Cisco Packet Tracer” in Tools section.

---

 

You can check the other Cisco Packet Tracer Examples below: Common Cisco Router Configuration Example on Packet Tracer Router DHCP Configuration Example on Packet Tracer VTP Configuration Example on Packet Tracer VLAN Configuration Example on Packet Tracer STP Configuration Example on Packet Tracer RSTP Configuration with Packet Tracer STP Portfast Configuration with Packet Tracer Inter VLAN Routing Configuration on Packet Tracer Switch Virtual Interface (SVI) Configuration with Packet Tracer BGP Configuration Example on Packet Tracer Port Security Configuration Example on Packet Tracer RIP Configuration Example on Packet Tracer CDP Configuration Example on Packet Tracer OSPF Area Types Example on Packet Tracer (Standard and Backbone Areas) OSPF External Routes Example on Packet Tracer OSPF Area Types Example on Packet Tracer (Stub, NSSA, Totally Stubby, Totally NSSA Areas) Standard Access-List Example on Packet Tracer Extended Access-List Example on Packet Tracer