CCNP 350-401 ENCOR Labs
CCNP ENCOR Lab Training
CCNP (Cisco Certificed Network Professional) is the Senior Level Network Engineering Certificaiton of Cisco. Especially CCNP Routing & Switching was the most popular CCNP Certification. With the big update of Cisco certifications, CCNP Content and Exams are also updated. Instead of Routing and Switching, CCNP Enterprise Certification Training and Exam are introduced. Instead of CCNP Route, CCNP Switch and CCNP Tshoot courses and exams, now, there is one exam for CCNP. You can find the required CCNP ENCOR Labs in this page.
CCNP ENCOR Lab Training include all the configuration lessons in CCNP ENCOR Course. After completing this course, you will be ready form the practical configuration part of CCNP ENCOR.
CCNP ENCOR 350-401
You should pass one Core exam for CCNP Enterprise Certification and CCIE Enterprise Infrastrcuture Certification. This exam is CCNP ENCOR 350-401. After passing this exam, you will be a CCNP and one exam far away from CCIE.
In this CCNP Enterprise Certification Training, you will find the lab scenarious and configuration that you will need in your CCNP ENCOR Exam. All the labs lessons will be here in CCNP ENCOR Labs Course and you can also download the lab files on Cisco Labs Page.
CCNP ENCOR Course Content
In CCNP Enterprise Certification Lab Course, we will cover all the configuration required for CCNP Enterprise Certification. In CCNP Enterprise course, we will cover ipv4 and ipv6 architectures, virtualisation techniques, network infrastructure, network assurance, network security and automation lessons detailly.
In this course, will learn the below lessons and more:
- Enterprise Network
- High Availability
- WAN Deployments
- SD-WAN
- SD-Acces
- QoS
- Virtualisation,
- VRF
- GRE
- VxLAN,
- Trunking
- Etherchannels
- Spanning Tree Protocols
- EIGRP
- OSPF
- eBGP
- Wireless Principles
- Wireless Component
- NAT
- Network Redundancy
- IP Multicast
- PIM
- IGMP
- SNMP
- Syslog
- NetFlow
- SPAN
- IP SLA
- NETCONF
- RESCONF
- AAA
- Access Lists
- REST APIs
- Network security
- Network Automation
- Python Basics
For Cisco Hands On Experience Follow This Course
In this CCNP ENCOR Lab Training, you will gain Hands on experience on Cisco routers and switches. To learn more, follow our course and practice together with the course. After this course, you will be ready for your CCNP ENCOR 350-401 Exam Lab and configuration parts.
- 4 Sections
- 24 Lessons
- 10 Weeks
- Security5
- Virtualization1
- Infrastructure14
- 3.1Static NAT Configuration10 Minutes
- 3.2Inter VLAN Routing with Router on Stick
- 3.3Dynamic NAT Configuration10 Minutes
- 3.4PAT Configuration10 Minutes
- 3.5VRRP Configuration10 Minutes
- 3.6HSRP Configuration15 Minutes
- 3.7EIGRP for IPv6 Configuration15 Minutes
- 3.8OSPFv3 Configuration15 Minutes
- 3.9eBGP Configuration10 Minutes
- 3.10EIGRP Configuration15 Minutes
- 3.11Multi Area OSPFv2 Configuration15 Minutes
- 3.12STP Portfast Configuration10 Minutes
- 3.13RSTP Configuration10 Minutes
- 3.14STP Configuration10 Minutes
- Network Assurance4
I am Gokhan Kosem, the Builder and the Maintainer of IPCisco.com. I am a Network Expert and Network Instructor that has more than 15 years Experience on IP Networking and Multi Vendor Network Equipments.
I have worked for important Network Vendors and Service Providers like Nortel, Alcatel-Lucent, Turkish Telecom and Vodafone. By Working on different projects of these compaines, I have gained many experiences on Network World. I have worked on various network devices of Top four vendors’, Cisco, Nokia, Juniper (Alcatel-Lucent) and Huawei for years. With various network trainnings, I have trained many network engineers.
At 2010, I decided to share my experiences with my colleagues on a blog and IPCisco.com borned. I am writing technical articles about network lessons and certifications on IPCisco.Com for 13 years. Now I am here to share with you, more than this! With the new design of IPCisco.com, I am always with you as I did before!
You might be interested in
-
All levels
-
0 Students
-
43 Lessons
